如何更換中科攪拌機內的液壓油?
使用攪拌機的一部分后，你會發現油泵會損壞，液壓油會被污染，需要更換液壓油。
After using part of the mixer, you will find that the oil pump will be damaged, the hydraulic oil will be polluted, and the hydraulic oil needs to be replaced.
那么如何有效地替換它呢?
So how to replace it effectively?
一、卸油前的準備工作
1、 Preparation before unloading
攪拌器每腳缸均充分膨脹，包括擺動、膨脹、垂直缸等。
Each foot cylinder of agitator is fully expanded, including swing, expansion, vertical cylinder, etc.
二、排油功
2、 Oil discharge work
將小型混凝土攪拌車泵缸內的液壓油取出，將混凝土活塞和泵缸連桿自由或連桿閥塊取出。
Take out the hydraulic oil in the pump cylinder of the small concrete mixer, and take out the concrete piston and the connecting rod of the pump cylinder freely or the connecting rod valve block.
三、清洗小泵車油箱，然后用面團將油箱內的雜質粘干凈。
3、 Clean the oil tank of the small pump truck, and then stick the impurities in the oil tank with dough.
四、清洗元件、液壓閥、閥塊、油箱防水擋板、二次構造柱壓鑄機具有較大的排水量
4、 Cleaning elements, hydraulic valve, valve block, water-proof baffle of oil tank, secondary structure column die-casting machine have large displacement
五、速度快，效率高
5、 Fast, efficient
六、注滿液壓油
6、 Fill with hydraulic oil
七、泵送和攪拌液壓系統，用于排油
7、 Pumping and mixing hydraulic system for oil discharge
八、放油分配系統
8、 Oil drain distribution system
九、油排水管道。為了保證油箱內油的順利沖洗，拆下的排油管連接低于油箱液位
9、 Oil drainage pipeline. In order to ensure the smooth flushing of the oil in the oil tank, the removed oil drain pipe connection is lower than the oil tank level
十、小型混凝土攪拌車泵車吊臂液壓系統排油。
10、 The hydraulic system of the lifting arm of the pump truck of the small concrete mixer discharges oil.
以上是中科攪拌機廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.jbckj.cn
The above content is introduced by the mixer manufacturer of China Science and Technology Co., Ltd. for more information, please visit the website: http://www.jbckj.cn
