全自動攪拌車廠家講解設備輪胎相關內容
全自動攪拌車是由多個參數決定的，不可能用任何一個參數來描述全自動攪拌車。因?yàn)樗?jīng)常行駛在不同的道路上，所以在輪胎方面會有一定的要求。它對輪胎有什么要求？輪胎的更換是怎么樣的？
Automatic mixer is determined by many parameters, it is impossible to use any one parameter to describe the automatic mixer. Because it often drives on different roads, there will be certain requirements in terms of tires. What does it require of tyres? What about tire replacement?
全自動攪拌車對輪胎有什么要求？
What are the tire requirements of the fully automatic mixer?
能承受足夠的載荷和速度，并能保證足夠的可靠性、性和抗側傾能力；全自動攪拌車輪胎具有良好的縱向和橫向路面附著力性能，有利于攪拌車的通過性和操控性。穩定;滾動阻力小，行駛噪音低；額定胎壓保持時間長，氣密性好；良好的徑向柔韌性、緩沖特性和減震能力，有利于乘坐舒適性和平穩性等；全自動攪拌車輪胎磨損均勻，耐磨性好，抗老化，使用壽命長，低廉；質量和轉動慣量小，均勻性和質量平衡性好；足夠的空間來安裝剎車。
Can withstand sufficient load and speed, and can ensure sufficient reliability, safety and anti-roll capacity; Fully automatic agitator tires have good longitudinal and transverse road adhesion performance, which is conducive to the agitator's passability and handling. Stable; Low rolling resistance, low driving noise; Rated tire pressure holding time is long, good air tightness; Good radial flexibility, buffering characteristics and shock absorption capacity, is conducive to ride comfort and stability, etc. Automatic agitator tires wear uniform, good wear resistance, anti-aging, long service life, low price; Small mass and rotational inertia, good uniformity and mass balance; Enough space to install the brakes.
因?yàn)檩喬ソ?jīng)常和路面接觸，加上需要承載全自動攪拌車的重量，所以我們在選擇輪胎的時候一定要慎重，一定要選擇質量好，使用時間長，承載能力強的輪胎。
Because tires are often in contact with the road and need to carry the weight of the automatic mixer, we must be careful when choosing tires. We must choose tires with good quality, long service time and strong bearing capacity.
全自動攪拌車輪胎的更換是怎么樣的？
What is the tire replacement of automatic agitator?
胎面花紋的厚度一定要大于1.6毫米，全自動攪拌車廠家認為如果你經常駕車行駛在摩擦力低的濕滑路面上，能保證胎面花紋厚度是上述數值的兩倍。全自動攪拌車胎面花紋磨損指示線，當磨損到達一定程度這些隱藏在胎面溝壑中的指示線就呈現出來。胎面花紋磨損指示線為扁平的橡膠條，與胎面縱向垂直鑲嵌在胎面溝壑中。如果輪胎上的幾乎所有指示線都清晰可見，意味著你需要盡快更換輪胎了。
Tread pattern thickness must be greater than 1.6mm, automatic mixer manufacturers believe that if you often drive on a wet road with low friction, can ensure that tread pattern thickness is twice the above value. Fully automatic mixing of tread pattern wear indicator line, when the wear reaches a certain degree these hidden in the tread groove of the indicator line will appear. Tread pattern wear indicator line is flat rubber strip, and the tread is vertically and vertically embedded in the tread groove. If almost every indicator line on your tire is clearly visible, it means you need to change your tire as soon as possible.
全自動攪拌車廠家講解設備輪胎相關內容便是以上了，設備輪胎的維護和保養工作一定要做好，不然非常容易就會在行駛過程中出現問題，造成危險隱患的存在，那么更多內容大家就來這里www.jbckj.cn咨詢吧。
The maintenance and maintenance of equipment tires must be done well, or it is very easy to have problems in the process of driving, causing the existence of dangerous hidden dangers, so more content we come here www.jbckj.cn consultation.
