產品推薦
資訊推薦
- 自動噴粉線的使用要注意哪些內容？
- 全自動混凝土攪拌車在山區能用嗎？
- 混凝土攪拌車系統結構的設置怎么達成作用？
- 自上料攪拌車廠家氣壓不足怎么解決？
- 混凝土攪拌車氣路系統的保養要注意什么？
- 混凝土攪拌車的混凝土凝固的快速解決方式!
- 使用自動上料攪拌車的幾個要點
- 全自動攪拌車開工干活要注重什么事項
- 混凝土自上料攪拌車使用錯誤的一些例子
- 自上料攪拌車攪拌軸停止轉動的原因
大型混凝土自上料攪拌車廠家抖動的原因有哪些？
大型混凝土自上料攪拌車廠家抖動的原因有哪些？
What are the reasons for shaking of large concrete self loading mixer manufacturers?
有時在使用混凝土攪拌車的過程中會遇到這種情況：車輛在行駛過程中會出現一種周期性的聲響，行駛速度越快，聲響越大。嚴重的時候整個車身都在發抖，在駕駛室手握方向盤就能有麻木的感覺。遇到這樣的狀況，說明車輛已經“故障”了，到底是哪里出了問題？造成混凝土自上料攪拌車抖動的原因有哪些呢？
Sometimes in the process of using concrete mixer, we will encounter this situation: there will be a periodic sound in the process of driving, the faster the driving speed, the greater the sound. When it's serious, the whole car body is shaking. You can feel numb holding the steering wheel in the cab. In such a situation, it means that the vehicle has "broken down". What is the problem? What are the causes of shaking of concrete self loading mixer?
造成混凝土自上料攪拌車振抖的原因有：
The causes of vibration of concrete self loading mixer are as follows:
一、傳動軸的彎曲；
1、 Bending of transmission shaft;
二、萬向節損壞，安裝不合要求；
2、 The universal joint is damaged and the installation is unqualified;
三、傳動軸上原平衡塊脫落；
3、 The original balance weight on the transmission shaft falls off;
四、中間支撐固定螺栓松動；
4、 The fixing bolts of the middle support are loose;
五、中間支承軸承偏斜；
5、 The middle support bearing is deflected;
六、傳動軸的凸緣和軸管焊接時位置歪斜；
6、 The position of the flange of the transmission shaft and the shaft tube is skew when welding;
以上六點是造成混凝土攪拌車車身發生抖動的原因，逐一排查以上可能出現的故障，然后對應解決，就能使混凝土自上料攪拌車恢復正常狀態。感謝您的閱讀，希望以上內容對您有所幫助，如想了解更多資訊內容請點擊官網:混凝土自上料攪拌車廠家http://www.jbckj.cn。
The above six points are the causes of the shaking of the concrete mixer body. Check the above possible faults one by one, and then solve them accordingly, so that the concrete self loading mixer can return to normal state. Thank you for reading, hope the above content is helpful to you, for more information, please click the official website: concrete self loading mixer manufacturer http://www.jbckj.cn .
