混凝土自上料攪拌車怎么用油？
混凝土自上料攪拌車怎么用油？我們說的油是潤滑油。
How to use oil for concrete self loading mixer? We are talking about lubricants.
1.對于攪拌主軸的軸承鏈接部位要加一次潤滑油，對于減速機等要加注黃油。
1. Add lubricating oil once a day to the bearing link part of the mixing spindle, and add grease to the reducer.
注：各潤滑點位于攪拌車出料門軸，各儲料斗和稱量斗門軸，膠帶運、機托輪、壓輪、滾筒、軸承、傳動鏈條、螺旋軸上、下端軸承及主機大齒輪等處。
Note: each lubrication point is located at the mixer discharge gate shaft, each storage hopper and weighing hopper gate shaft, belt conveyor, supporting wheel, pressure wheel, roller, bearing, transmission chain, upper and lower end bearing of screw shaft and main gear of main engine.
2.檢查空壓機曲軸箱內潤滑油質量。必要時進行更換;空壓機的油料必須時刻保持。
2. Check the quality of lubricating oil in the crankcase of air compressor. Replace if necessary; The oil of air compressor must be kept at all times.
3.在冬季要加保溫油不易結冰，還要做好保暖工作。
3. In winter, heat preservation oil should be added to avoid freezing and keep warm.
這里說的油不是燃油是潤滑油，防護油等各種機械養護用油?；炷磷陨狭蠑嚢柢囋O(shè)備如人一樣要做到精心呵護，才能大限度的提高設備的使用壽命以及減少機器故障發生的頻率，定期加油是不可缺少的重要養護方法，在平時的操作中加油要按時按質完成。
The oil here is not fuel oil, but lubricating oil, protective oil and other mechanical maintenance oil. Concrete self loading mixer equipment, like people, should be carefully cared, so as to greatly improve the service life of the equipment and reduce the frequency of machine failure. Regular refueling is an indispensable important maintenance method, and refueling should be completed on time and quality in normal operation.
新型加氣混凝土攪拌車的優點：
The advantages of the new aerated concrete mixer are as follows:
1、產值大、效率高：連續平穩工作，連續式攪拌車的單機產值高。
1. Large output value and high efficiency: continuous and stable operation, high output value of single continuous mixer.
2、不漏漿，磨損?。哼B續式攪拌車進料端為干料攪拌以及兩軸端均加有反螺旋，因而不存在漏漿疑問。攪拌車對耐磨材料的需求也不高。
2. No slurry leakage and small wear: the feeding end of continuous mixer is dry material mixing, and the two shaft ends are equipped with reverse screw, so there is no slurry leakage problem. The demand of mixer for wear-resistant materials is not high.
3、運用及維護費用低：構造環節少、皮帶短、工作平穩。
3. Low cost of operation and maintenance: few construction links, short belt and stable work.
4、空間占用較少：減少了大成品斗及骨料中儲斗，高度低、占地面積小。
4. Less space occupation: large finished product hopper and aggregate storage hopper are reduced, with low height and small floor area.
5、毛病低：連續式攪拌車全部設備啟停次數僅為空隙式攪拌車的1/7—1/3，因而設備壽命長，毛病概率低。
5. Low defects: the starting and stopping times of continuous mixer are only 1 / 7-1 / 3 of that of gap mixer, so the service life of equipment is long and the probability of defects is low.
6、主機工作平穩：原材料在相對較長的時間段均勻進入攪拌車。無間歇式突發投料進程。
6. The main engine works smoothly: raw materials enter the mixer evenly in a relatively long period of time. There is no intermittent sudden feeding process.
