當前位置：首頁 »新聞中心 » 公司新聞常檢查混凝土自上料攪拌車廠家的剎車片和水溫！

常檢查混凝土自上料攪拌車廠家的剎車片和水溫！

來源：http://www.jbckj.cn 瀏覽：0發表時間：2021-06-28

混凝土自上料攪拌車廠家的剎車片關于每一位車主來說都是十分重要的，為了確保了跋涉中的。一般一般來說，一個杰出的剎車片應具有4大底子要求：

The brake pads of concrete self loading mixer manufacturers are very important for every car owner, in order to ensure the safety of trekking. Generally speaking, an outstanding brake pad should have four basic requirements:

1.混凝土自上料攪拌車適合的抵觸系數。抵觸系數是抵觸材料的底子參數，抉擇底子的剎車片制動力矩。國標就嚴格要求制造商有必要在包裝上注明抵觸系數。抵觸系數有必要恰當，太高會構成制動過程中的車輪抱死、方向失控和燒片，太低則制動距離過長。

1. Suitable resistance coefficient of concrete self loading mixer. The friction coefficient is the base parameter of the friction material, which determines the brake torque of the base. The national standard strictly requires the manufacturer to indicate the coefficient of conflict on the package. If the coefficient of friction is too high, the wheel will lock up, the direction will be out of control and the disc will burn. If the coefficient is too low, the braking distance will be too long.

2.合理的混凝土自上料攪拌車壽數。運用壽數是咱們廣泛注重的產品方針。一般剎車片能確保3萬的運用壽數。像剎車片資猜中選用的大顆粒石墨和黃銅還能夠削減對剎車盤的磨損。

2. Reasonable life of concrete self loading mixer. Using longevity is the product policy that we pay attention to extensively. The general brake pad can ensure the service life of 30000 km. For example, the large particle graphite and brass used in the brake pad selection can also reduce the wear of the brake disc.

3.滿足的舒適性。混凝土自上料攪拌車舒適性功能的直接體現，包括制動感覺、噪音、粉塵、冒煙、異味等。跟著私家車的增多和人們生活水平的前進，在滿足的底子前提下，舒適性越來越成為抵觸片的重要方針。

3. Satisfied comfort. The comfort function of concrete self loading mixer is directly reflected, including braking feeling, noise, dust, smoke, peculiar smell, etc. With the increase of private cars and the progress of people's living standards, comfort has become an important policy under the premise of safety.

4.可靠的性?；炷磷陨狭蠑嚢柢?chē)廠家剎車片在制動時會發生瞬時的高溫，尤其在高速跋涉或緊急制動時。在高溫狀況下，抵觸片的抵觸系數會下降，稱為熱衰退性。熱衰退性的凹凸抉擇高溫狀況和緊急制動時的。

4. Reliable security. The brake pads of self loading concrete mixer will have instantaneous high temperature when braking, especially when high-speed trekking or emergency braking. Under the condition of high temperature, the coefficient of resistance will decrease, which is called heat recession. High temperature condition and emergency braking safety in case of heat recession.
混凝土自上料攪拌車廠家

有這樣一種狀況，便是咱們的駕馭員在駕馭混凝土自上料攪拌車的時分會常常發覺這樣的一種現象，那便是水的溫度過高，這個究竟什么狀況呢？

There is such a situation that our drivers often find such a phenomenon when driving the concrete self loading mixer truck, that is, the water temperature is too high. What is the situation?

一、焚燒建議車時的操作過程不正確。

1、 The operation process is not correct when burning the vehicle.

二、冷卻介質短少：①防凍液：高級車要求一年四季都要加注防凍液；②水或蒸餾水：暫時代用；③水箱蓋漏水。

2、 Short of cooling medium: 1. Antifreeze: high-grade cars are required to be filled with antifreeze all year round; ② Water or distilled water: temporary substitute; ③ The water tank cover is leaking.

三、混凝土自上料攪拌車水泵缺陷：葉輪打滑或卡死導致正時皮帶斷掉；葉輪變形。

3、 Defects of water pump of concrete self loading mixer: impeller slipping or stuck, resulting in broken timing belt; The impeller is deformed.

四、冷卻電扇不轉：冷卻電扇或許由溫控開關操控；也或許由水溫傳感器操控。

4、 Cooling fan does not turn: cooling fan may be controlled by temperature control switch; Or maybe it's controlled by a water temperature sensor.

五、混凝土自上料攪拌車水箱阻塞：外部阻塞應用水或氣將臟物除去；內部阻塞會影響冷卻液的循環，一起會發生壓力，這時會有兩種作用，一種是水箱漏水，另一種是在高速行駛時水溫特別高。

5、 Water tank blockage of concrete self loading mixer: external blockage shall be removed by water or air; Internal blockage will affect the circulation of coolant, and pressure will occur together. At this time, there will be two effects, one is water leakage in the water tank, and the other is particularly high water temperature when driving at high speed.

六、汽缸損蝕：焚燒室與水道沖，這時會從排水管排水或排白煙，構成水箱經常性缺水；水道與油道沖（機油有水呈白色）；水道與水道沖，構成缸體散熱不良，尤其在高速時影響更大。

6、 Cylinder erosion: when the combustion chamber is flushed with the water channel, the water will be drained or white smoke will be discharged from the drain pipe, resulting in frequent water shortage of the water tank; Water channel and oil channel flushing (the engine oil is white when there is water); The water channel and the water channel rush together, resulting in poor heat dissipation of the cylinder block, especially at high speed.

七、節溫器損壞：如想拆掉節溫器，此刻應把小循環堵上，這樣能夠確保冷卻液悉數由水箱散熱；裝新節溫器時應留神是否有過水孔。

7、 Thermostat damage: if you want to remove the thermostat, you should plug the small circulation at this moment, so as to ensure that all the coolant is dissipated by the water tank; Pay attention to whether there are water holes when installing a new thermostat.

假定在駕馭混凝土自上料攪拌車的時分發現了水溫過高就要靠邊泊車，但不要當即熄火。由于冷卻液的溫度現已很高，降溫才華已達到極限，這時假定當即熄火，歡娛的冷卻液也就間斷了循環。過高的溫度得不到冷卻，建議機也是難以承受的。假定先讓建議機怠速作業一瞬間，不斷循環的冷卻液仍是能夠減輕高溫對建議機的影響。

If the water temperature is too high when driving the concrete self loading mixer, it is necessary to pull over and park, but do not turn off the engine immediately. Because the temperature of the coolant is now very high, the cooling ability has reached the limit. At this time, it is assumed that the engine will be turned off immediately, and the entertainment coolant will be interrupted. Too high temperature can't be cooled, so it's hard to bear. Assuming that the recommender idles for a moment, the continuous circulation of coolant can still reduce the impact of high temperature on the recommender.

混凝土自上料攪拌車水溫過高的原因大約為上面介紹的內容，還有便是必定要留神在水的溫度過高狀況下千萬千萬不要救活，不然就會對建議機構成持久性的危害。

The central reason for the high water temperature of the concrete self feeding mixer is about the content described above. In addition, we must pay attention not to revive the mixer when the water temperature is too high, or it will cause lasting harm to the mixer.

本文由混凝土自上料攪拌車廠家整理提供，希望以上內容對大家有所幫助，如想了解更多精彩內容請點擊官網：http://www.jbckj.cn。

This article is provided by the manufacturer of self loading concrete mixer. I hope the above contents can help you. For more wonderful contents, please click the official website: http://www.jbckj.cn .

下一篇：小型自上料攪拌車負荷過大是何原因？上一篇：該怎么維護自上料攪拌車的密封條？