全自動攪拌車的喇叭工作不良及時處理
全自動攪拌車的喇叭內部密閉的，屬于小的部件，容易損壞，所以使用時一定要謹慎。那么你知道全自動攪拌車的喇叭工作不良時要怎么進行處理嗎？
The horn of the automatic mixer is sealed inside and belongs to small parts, which are easy to damage, so we must be careful when using it. Then you know how to deal with the speaker of the automatic mixer when it works badly?
全自動攪拌車有些喇叭內部電磁線圈漆包線端子接頭是鋁金屬鉚釘壓接連接的，非牢靠焊接連接，如果端頭漆包線上的絕緣漆處理不凈或鉚釘壓接不牢靠很容易產生虛接故障，導致喇叭工作不良。此種故障是喇叭質量原因，只能換件。
Automatic stirring truck some horn internal electromagnetic coil enameled wire terminal joint is aluminum metal rivets crimping connection, insecure welding connection, if the insulation paint treatment on the end of the enameled wire is not clean or rivet crimping is not reliable, it is easy to produce false connection failure, resulting in poor speaker work. This kind of fault is horn quality reason, can only be replaced.
雖然全自動攪拌車?yán)葍?nèi)部是密閉的，但如果密封不嚴清洗全自動攪拌車時進入霧氣或內部空間空氣中有水蒸氣，水蒸氣很容易導致觸點受潮無法正常工作。
Although the horn of the automatic mixer is sealed inside, if the seal is not strict when cleaning the automatic mixer, there is water vapor in the air of the internal space, which is easy to cause the contact to be damp and cannot work normally.
如果長時間按喇叭易造成喇叭觸點燒蝕而產生阻抗，流過電磁線圈的電流減弱，全自動攪拌車電磁吸力下降無法吸引銜鐵帶動膜片正常振動，導致發音沙啞甚不響。但不斷按喇叭時，若瞬間強電流通過阻抗依然能正常工作，所以會時好時壞。
If the horn for a long time is easy to cause speaker contact ablation and impedance, the current flowing through the electromagnetic coil is weakened, the electromagnetic suction of the automatic agitator car can not attract the armature to drive the diaphragm normal vibration, resulting in hoarse or even not ringing. But when constantly honking the horn, if the instantaneous strong current through the impedance can still work normally, so it will be up and down.
所以要好好進行愛護才行，多注意一些事項，比如洗車時切記防止攪拌車?yán)缺涣軡?，發現攪拌車?yán)冗M(jìn)水盡快用風槍吹干。
So we should take good care of it, pay more attention to some matters, such as car washing to prevent the mixer horn from being wet, found that the mixer horn water as soon as possible with air gun dry.
全自動攪拌車廠家認為盡量不要總是長時間按攪拌車的喇叭，這樣容易造成攪拌車?yán)扔|點過早燒蝕。攪拌車?yán)瘸霈F(xiàn)故障盡量尋求維修技師幫助，不要盲目更換攪拌車?yán)龋菀自斐刹槐匾睦速M(fèi)。
Automatic mixer manufacturers think that try not to always press the mixer horn for a long time, which is easy to cause premature ablation of the mixer horn contact. If the mixer horn fails, seek the help of professional maintenance technicians as far as possible. Do not blindly replace the mixer horn, which is easy to cause unnecessary waste.
因此全自動攪拌車的喇叭工作不良時要及時處理，這樣才不會讓攪拌車的工作效率受到影響。更多內容就來網站www.jbckj.cn進行咨詢吧。
Therefore, when the speaker of the automatic mixer works badly, it should be handled in time, so that the work efficiency of the mixer will not be affected. For more information, please visit www.jbckj.cn.
