混凝土自上料攪拌車葉片故障的維修
葉片作為混凝土自上料攪拌車設備重要組成部分之一，對攪拌過程有直接影響，并且葉片質量在一定程度上能夠決定攪拌車使用的壽命，因此在攪拌車使用的過程當中，葉片損壞的程度往往比較高，所以需要重視葉片維修技術。混凝土自上料攪拌車廠家為您講解具體維修內容：
As one of the important components of the concrete self loading mixer, the blade has a direct impact on the mixing process, and the blade quality can determine the service life of the mixer to a certain extent. Therefore, the blade damage is often high during the use of the mixer, so it is necessary to pay attention to the blade maintenance technology. The manufacturer of concrete self feeding mixer will explain the specific maintenance contents to you:
混凝土自上料攪拌車在每次結束攪拌之后，需要立即清洗攪拌車的葉片，從而及時葉片的污垢。攪拌車的葉片以及振動軸承應當?shù)渭訚櫥?，同時要對攪拌車葉片進行防生銹以及除銹處理。
The blades of the self feeding concrete mixer truck shall be cleaned immediately after each mixing, so as to remove the dirt on the blades in time. The blades and vibration bearings of the mixer shall be dripped with lubricating oil, and the blades of the mixer shall be subject to rust prevention and rust removal.
其次是要定期檢查攪拌車的葉柄以及葉片焊接質量，并且檢查葉片磨損消耗的狀況，一旦發現存在異常問題，需要及時記錄并進行更換維修，檢測葉片底部的導通狀況，避免葉片的焊接點出現漏電。
Secondly, the welding quality of the blade handle and blade of the mixer shall be checked regularly, and the wear and consumption of the blade shall be checked. Once any abnormal problem is found, it shall be timely recorded and replaced for maintenance, and the conduction condition at the bottom of the blade shall be checked to avoid power leakage at the welding point of the blade.
再次是在攪拌的過程當中，維修人員應當注意辨別葉片運轉的聲響，認真檢查葉片運轉的速度以及力度，防止出現斷裂故障。
Thirdly, in the process of mixing, maintenance personnel should pay attention to identify the sound of blade operation, carefully check the speed and strength of blade operation, and prevent fracture failure.
要做好攪拌車葉片耐磨損的處理，根據攪拌車運行的要求，合理調整攪拌車葉片以及襯板間的距離，并且根據葉片狀況在葉片上使用锘或者錳等材料，改善攪拌車葉片的強度以及耐磨度。
It is necessary to properly handle the abrasion resistance of the mixer's blades, reasonably adjust the distance between the mixer's blades and lining plates according to the requirements of the mixer's operation, and use materials such as nano meter or manganese on the blades according to the condition of the blades to improve the strength and abrasion resistance of the mixer's blades.
除了上述維修技術，要想確保攪拌車的正常運行，還需要完善機械維修制度。一方而是要建立計劃維修制，使用過程當中根據維修計劃制定科學的維修間隔，從預防為主的原則出發保證攪拌車運行狀態良好。另一方面是要建立狀態維修制。您要了解詳細內容就來我們網站http://www.jbckj.cn咨詢吧！
In addition to the above maintenance technologies, in order to ensure the normal operation of the mixer, it is also necessary to improve the mechanical maintenance system. On the one hand, it is necessary to establish a planned maintenance system, formulate scientific maintenance intervals according to the maintenance plan during the use process, and ensure that the mixer operates well from the principle of prevention first. On the other hand, it is necessary to establish a condition based maintenance system. Come to our website if you want to know more http://www.jbckj.cn Consult!
